  |
||||||||||
       |
|
|
||||||||
 |
UVA most innovative leader in
vertical packaging market. March 2008 UVA will supply all media in the next view weeks with information on UVA's innovations which will be presented on the Interpack 2008. contact us or see press release. |
|||||||||
 |
UVA presented speed and
flexibility on Snaxpo in Texas USA. March 2008 A big hit on the Snackpo was the in 2006 introduced and patented EDGESEAL APPLICATOR on the UVA LIMAnx. The fact it was placed as a retrofit unit on top of the machine surprised many visitors, but also the competition. This approach on a continuous motion machines means also high speed with the possibility to produce all kind off bags with one machine. UVA is the only manufacturer that offers this flexibility and is the most innovative suppliers in the packaging market contact us. |
|||||||||
 |
UVA gives support for new
introduction of Doy style bag in vegetables.
December 2007. The stand up pouch or Doy style bag has become very popular. For one of our leading customer in vegetables flexibility is very important. Pillow, gusset and flat bottom were already in their assortment. The need for capacity increase and the market wish for a stand up pouch was solved by our LIMA with a cornerseal unit and special Doy former for vegetables. contact us. |
|||||||||
 |
Multibagger and Twin Tube big hit at
Snackex May 2007. UVA showed their innovative NEWTON multibagger on the snackex in Barcelona. The flatbotom multibag bag attracted a lot of attention, because of film savings and appearance. For the primary bags UVA introduced the LIMAtt, a box motion vertical bagger with two tubes. It has been demonstrated with a double 133mm formerset with a speed off 300 bags a minute. Box motion means no limitations to baglengths or dwell time and capable of making flat bottom, cornerseal or doy-style bags. Unique selling points compared to rotary systems. If you want to know more, contact us. |
|||||||||
 |
Edge seal applicator works very
convenient. December 2006. Based on many years of experience, UVA developed a new edge seal principle (patent pending) which offers our customers the flexibility they need. Our engineering was very pleased with a customer reaction: "we can switch between a pillow bag and a cornerseal flat bottom bag in less than 30 minutes. This is much faster than we ever expected" If you want to know more, contact us. |
|||||||||
 |
New innovations impressed
exhibition visitors. October 2006. The biggest hit on the UVA Packaging stand was the new EDGESEAL APPLICATOR on the UVA LIMAnx. The unit was placed in a special exhibition frame at the backside of the machine (photo). The modularity and extremely simple bag size change impressed many people. The cornerseal does not compromise on film speed what makes the LIMA an extremely fast cornerseal bagmaker. Visitors made also many compliments on the new introduced flowwrapper UVA BRAVO, (photo) which is proving again that UVA packaging is one of the most innovative suppliers in the packaging market (photo). |
|||||||||
 |
UVA introduces high quality
Flowwrapper September 2006. On the Macropak in Utrecht (NL) UVA will introduce officially their flowwrapper UVA BRAVO. The machine will be standing on our booth next to the vertical bagger UVA-LIMA. Both are machines, which distinguish themselves from their competition by their quality design. The rugged design guarantees worry free operation day in day out. The BRAVO is a flowwrapper with 4 servo drives which makes it possible to reach higher speeds, higher accuracy and more flexibility. The machine can be provided with a complete package of options for an excellent price performance. (read more). |
|||||||||
 |
UVA unique GLOBAL MASTER JAWS
available on FLASH January 2006 For sealing polyethylene-based film several sealing systems are available on the world. What makes the difference? In the last decade UVA packaging developed the GLOBAL MASTER JAWS, initially for detergent applications. Very effective for many powder products, but this jaw system is also well performing for deep-frozen products. The jaws are in principle based on cold jaws with seal wires, which is not unique. The smart design on the other hand is unique, resulting in for example a high output with quality flat bottom bags. Some major accounts have seen the performance at our test and demo centre and made us aware of the difference. The jaws are standard available on our NEWTON bagger, but now also on our economical vertical bagger FLASH. This makes it interesting for a wide range of applications and customers. |
|||||||||
 |
UVA enabled technology
for Flat Bottom multi-bags in the potato snack market. This application is developed as a module on the vertical form and fill and seal machine NEWTON. Creative thinking of UVA engineers resulted in a special former with patented technology inside, which is not compromising machine performance. Look in the supermarkets to see for your self or
contact us. |
|||||||||
 |
The extreme fast UVA LIMANX
on the Empack. October 2005. On the Interpack 2005 UVA Packaging introduced proudly the new vertical form fill and seal machine, the UVA LIMANX, setting a new standard in continuous motion. The UVA LIMANX will be running 140 block bottom bags a minute on the Empack in Brussels, 40% faster than the competition. The UVA LIMANX is a 'heavy duty VFFS-machine with an excellent price/performance. The rugged design and selected quality components are the fundament for a worry-free operation day-in and day-out, with an high accuracy and without unwelcome downtime. Visit our booth at the Empack or our Test & Demonstration Center in Eindhoven to see the UVA LIMANX and his performance. |
|||||||||
 |
UVA presents innovations in USA, on Vegas Pack
Expo. September 2005. UVA is constantly looking for innovations and solutions that will make our customers more competitive. On the Vegas show, the NEWTON 250c(photo) will run pillow bags at a speed off 220 bags a minute. Customers who know the limits off their vertical baggers do know that this is extremely fast. Experience it your selves, visit us on the Expo or at our premises. The NEWTON 400 with corner seal module and Slidder Zipper applicator will be demonstrated. This vertical solution offers a perfect reclosable bag, a perfect alternative for pre-made bags. (photo) |
|||||||||
 |
In the vegetable market
the appearance of the bag becomes more important for market share.
July 2005. UVA is aware of that and is looking for decisive improvements, which give our customers an advantage. Proven technology and valuable experience combined with innovative details are needed. Making bags with 'low-cost' PP film is common in the vegetable market. Making air-tight bags is crucial for shelf live and demands extensive inspection and also undesirable waste. UVA improved an already well performing jaw set and is minimising waste, by reducing micro-leakages to an absolute minimum for 'difficult' multiple layers seals. With this innovation UVA can offer their customers a possibility to pack their product in flat bottom bag with cornerseals, without an increase in film cost and waste. This is a big advantage for shelf live, cost and shelf appearance. With this 'small' innovation, extensive experience in the vegetable market, a continuos motion configuration driven by your industry, UVA packaging is a partner for packing your product. We are excited to share our knowledge with you at our premises or on the Empack in Brussels. (contact us) |
|||||||||
 |
Interpack: Slider Zipper big hit on stand UVA
Packaging. April 2005. The biggest hit on the UVA Packaging stand was the new SLIDER ZIPPER on a VFFS machine, capable of placing slider zippers in pillow, flat bottom ánd corner seal bags, with the fastest speed possible (N400i CS SZ) Visitors made many complements, which is proving again that UVA packaging is one of the most innovative VFFS suppliers in the market. The cornersealed bags with slider were very popular and kept our stand crew busy producing new samples. The new technology is ideal for pet food, powdered products and frozen food packages and will give our customers a preferred package without sacrificing fill speeds. The fact that the slider is applied in transfer direction allows making stand up bags with a capacity up to 7 kg, which makes the reclosable function of the SLIDER worthwhile. Consumers simply use the sliding device to open and close the zipper, instead of pressing their fingers along the zipper to close it. The launch of NEWTON 400 with SLIDER ZIPPER technology was a true success; what better proof than sales right off the exhibition floor. (contact us) |
|||||||||
 |
New
innovations at our booth on Interpack 2005. |
|||||||||
 |
UVA LIMAnx
configured for your convenience setting a standard in the
market. March 2005. UVA packaging has a broad experience in several segments in the packaging market and does know what our customers need. Besides our strong focus on building machines on customer demands, a configuration especially for your industry will be a big advantage for many customers with their specific requirements. (read more..) |
|||||||||
 |
Multibagging in the salty snackmarket,
flexibility needed on your VFFS. March 2005. Looking at the bags in an average supermarket confirms the trend that bagstyle has become more important. A simple pillow bag is still there but in all segments other bags, like stand up pouches, flat bottom bags and corner sealed bags have become common property. UVA packaging has invested in new technologies for several applications to improve the bagging process and makes it feasible for these markets. This investment has resulted in a patent (pending) for the multi-bagging application in the salty snack market. But more important a new bag is introduced in the market by one off our customers, has given them an early start in the market. (contact us) |
|||||||||
 |
Valves in chocolate packaging. February 2005. UVA packaging has configured a NEWTON for packing several dimensions of bags for the chocolate production. Palletising is an essential part of the total production process for the bags filled with up to 20 kg of chocolate pastilles. For this reason a valve applicator is integrated in the NEWTON to add a valve inside the bag. The purpose of the valve is to avoid instability of the stack with bags. The valve will allow air to escape from the bag when handled by the palletiser and when placed into stack. This valve applicator is normally used for degassing or freshness applications in the coffee industry. If necessary the applicator can be upgraded with ultrasonic technology to reduce sealtime. (contact us). |
|||||||||
 |
Tilting the Newton to minimise cracks in product. September 2004. UVA packaging developed innovative technologies for their VFFS machine NEWTON. For example a tilting device. Vulnerable products are difficult to pack on vertical form fill and seal machines. Product damage is likely as a result of uncontrolled dropping. For these kind of products special VFFS machines are available with a former pipe put under an angle. UVA packaging developed an electrical driven tilting device for the NEWTON, which allows the machine to tilt, on every angle up to 60°. The centre of the movement is designed in the top of the hopper, so it stays always in production position. (Contact us) |
|||||||||
